Opening a New Era of Hinges - 【 PG Gear Hinge 58 】 Newly Launched

◆ National standard (JG/T127-2017) with a load-bearing capacity of 50kg and a service life of over 35000 times

◆ European standard (BS EN13126-6:2018) with a load-bearing capacity of 60kg and a service life of over 20000 times

◆ Drop test can support 90kg

◆ The wind pressure resistance capacity can reach 100kg, according to the Shenzhen standard wind pressure of 0.75KN/m ² Converted, the wind resistance can reach level 8 or above

◆ 1000N suspended end lifting weight test, hinge structure and function are normal

◆ Rivet point failure resistance test reaches 1330kff

NSST testing reaches 750H or above

QUV test reaches 3000H or above

CONFORMATION 

The PG gear hinge 58 adopts a gear type design, utilizing the continuous meshing motion between the gear and the base to ensure even and stable force when the hinge is opened and closed. It is simple and clever, completely eliminating problems such as jamming and abnormal noise. To achieve the effect of effortless and quiet opening and closing of doors and windows.

After careful adjustment, the hinge opening stroke is designed to be 80mm, achieving short stroke and large opening. A shorter translation stroke can effectively reduce the wear of hinge connectors caused by long-distance movement, without affecting the daily cleaning and scrubbing of windows.

DESIGN 

The hinge base is embedded with wear-resistant and high-strength lifting aid plastic pads, which adopt a slightly raised design, completely solving the problems of bottom grinding and sagging during hinge opening and closing. The lifting function makes the window sash open more smoothly and has a better mute effect.

Add limit pins to effectively control the maximum opening angle of the hinge. When the hinge reaches its maximum opening angle, the pins can effectively fix the hinge in the open state, greatly enhancing its wind pressure resistance.

The unique friction adjustment block design can achieve free adjustment of the opening and closing force of the window sash by adjusting the tightness of the friction block screws, with an adjustment force of 40N~300N, and the hinge can stop at any point.

 

The gap adjustment block is used to adjust the width of the gap between the frame and the fan. It can be adjusted horizontally by+/-2mm to ensure the closure and airtightness of the window, prevent the lack of tightness of the frame and fan caused by improper installation, and ensure that the performance of the doors and windows is in the best state, with high airtightness and accurate closure.

INSTALL

The PG gear hinge 58 adopts a double fixed installation method of clips and screws. The European standard C-groove profile can be directly installed without milling the frame profile, which has no impact on the sealing strip and ensures the airtightness of doors and windows. Simple and fast, dual fixation can effectively avoid the problem of hinge loosening after long-term use.

Product Name: PG Gear Hinge 58-14

 

TESTING REPORT 



 

CNAS - China National Accreditation Service for Conformity Assessment, abbreviated as CNAS, is a national accreditation body approved and authorized by the National Accreditation Administration for Conformity Assessment. It is responsible for the accreditation work of certification bodies, laboratories, and inspection institutions.

ILAC - China National Accreditation Service for Conformity Assessment, is an international organization for mutual recognition of laboratories.

Using ILAC-MRA Authority: The China National Accreditation Service for Conformity Assessment (CNAS) signed a multilateral mutual recognition agreement (ILAC-MRA) with the International Organization for Accreditation of Laboratories (ILAC) on January 31, 2001, and obtained ILAC's approval to use the ILAC-MRA International Mutual Recognition Mark in January 2005. This indicates that testing laboratories accredited by CNAS can use both the CNAS logo and the ILAC-MRA logo when issuing testing reports.

Intertek, as one of the world's largest consumer product testing, inspection, and certification companies, is renowned worldwide for its recognized professionalism, quality, and integrity. Relying on a global service network spanning over 100 countries, Intertek has become a trusted partner for global customers by providing the industry's highest standards of fair and accurate high-quality services and innovative solutions.

 

 

Exquisite in quality, meticulous in details, loyal to research and innovation, aiming to cast safer, more convenient, and high-performance products to meet the needs of end users for high-quality doors and windows. The needs of users have always been the driving force behind Paige's continuous research and development.